| Color: | Transparent |
|---|---|
| Mfr G/10min: | Above 7 |
| Transport Package: | 25kg/Bag |
| Specification: | 25KG/BAG |
| Trademark: | LABEYOND |
| Origin: | China |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Semiconductor industry: fittings, linings, chip baskets,etc.
Automotive manufacturing: fittings, values, high-temperature cables, etc.
Chemical industry: instrument circuits, valve linings, thermocouples, chemical laboratory utensils, tower packing, pump impellers, pump shells, tubes for heat exchanges, etc.
Wire and cable industry: wires and cables for aerospace and military use, wires for nuclear industry, wires for machine wiring, heat-resistant wires, flat cables, coaxial cable sheaths, etc.
Film and sheet: air cushions, skins, printed circuit boards, capacititve film, gas collection bags, film for steel building materials, separation films,building protection films, etc.
Electronics and electrical fields: electroinc wires, drag chain cables, connectors, joints, sockets, etc.
ETFE (Ethylene tetrafluoroethyene copolymer) has the same electrochemical properties as FEP but with superior mechanical properties.
The company has developed seven series and twelve products in three categories of injuction, extrusion, and compression molding with seven different colors.
| Physical Properties | Unit | |
| Relative Density | g/cm3 | 1.73-1.81 |
| Melt Flow Rate | g/10 min | ≥7 |
| Melting Point | ºC | 165±5 |
| Mechanical Properties | Unit | |
| Tensile Strength | Mpa | ≥30 |
| Elongation at Break | % | ≥300 |
| Shore hardness | Shore | 60 |
| Impact strength cantilever beam method | N/M | No breakage |
| Coefficient of Friction | - | 0.4 |
| Thermal Properties | Unit | |
| Continuous Use Temperature | ºC | 180 |
| Heat Deflection Temperature | ºC(1.82Mpa) | 74 |
| Coefficient of Thermal Expansion | (-10x(-5)ºC) | 9.0-9.3 |
| Electrical Properties | Unit | |
| Volume Resistivity | Ω.cm | 10(16)-10(18) |
| Dielectric Strength | KV(3.2mm thickness) | 16 |
| Relative Permittivity | 10(3)HZ | 2.4-2.6 |
| Dielectric Loss Tangent | 10(6)HZ | <0.005 |
Please dry at 120ºC for 2 hours before production.
The equipment used for this product must be cleaned and free of any residues.
This product is only suitable for industrial use. If used for other purposes, its safety cannot be guaranteed.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}