Product Description
The product suitable for equipment cables, which can replace non-flame retardant crosslinked polyethylene insulation, simplify the cable structure and reduce the cost of cable, which is a safe and environmental protection material, comply with ROHS and REACH.
Trade Mark and Appilcation
| Trade Mark |
Product Name |
Application |
| YT-1051K |
105ºC Silane-crosslinked halogen-free low-smoke flame-retardant polyolefin cable material |
Applicable for insulation layer of control cables up to 3kV. |
Performance Indexes
Can be customized according to customer's requirements.
Use Methods
1. Mixing: Mix the component A and component B evenly, add them into the hopper. If the color required, use the EVA base materials (the color masterbatch should be dried). The material should be use up within 2 hours after unpacking. (It can't be dried). The external water can' be brought in during the process.
2. Suggest to use equal distance & unequal depth, single thread screw.
3. Extrusion Temperature:
| Zone 1 |
Zone 2 |
Zone 3 |
Zone 4 |
Neck |
Head |
| 100±10 |
125±10 |
135±10 |
135±10 |
140±10 |
140±10 |
4. Double color cable: Color line can use component A and EVA base materials together, without or with a small numner of component B.
5. Pay-off speed: Without affecting of surface smoothness and perfirmance the faster, the better.
6. Crosslink:
Natural crosslink or water bath (Steam).
Natural Crosslink: Temperature 15-25ºC, crosslink will be finished around 7 days.
hen temperature is higher than 25ºC, crosslink will be finished around 3 days.
Water bath or Steam: should control the temperature arond 60-70 ºC in order to keep it from sticking together, it will finish about 4 hours. The thickness of the test piece is 1mm. It thickness >1mm, the crosslink time should be adjusted according to the actual situation. Full performance test, water bath (steam) 65ºC, more than 8 hours, to ensure the material is fully crosslinked.
Package, Transport and Storage
1. Package: Vacuum packed.
2. Transport: Can't be exposed to the sun or rain, or suffer mechanical damange.
3. Storage: Should be stacked on the backing plate in a clean and dry warehouse.
Valid Period: 12 months.
Audited Supplier 
){kind=link}
){kind=link}