T Nuts Aluminium Profile 2020 Extrusion Angle Bracket
| Description |
Fastener |
Mass |
Part No. |
| (g) |
| PG20-20x20 |
-- |
4 |
20.2.02.020020.01 |
| PG20-20x20 (Set AZ) |
2xAZ |
10 |
20.2.02.020020.02 |
Installation Instructions
Product Description
| Matching Profiles |
|
|
|
| |
Normal |
Strengh |
Double |
| PG20 |
√ |
× |
× |
| PG30 |
√ |
√ |
√ |
| PG40 |
√ |
√ |
√ |
| PG45 |
√ |
√ |
√ |
| Slot 10 - PG40 |
√ |
√ |
√ |
| Slot 10 - PG45 |
√ |
√ |
× |
Notice: Compatible fastening sets being offered for all dimensions of extruded brackets connector.
Die cast angle bracket connectors are usually used for cross - connection or T - connection between two industrial aluminum profiles. They have high connection strength, good versatility and convenient installation, but poor concealment.
There are lugs at the middle seam of the two outer holes of the die cast angle bracket. When installed, they are embedded in the T - slot, which can effectively resist torque and prevent the structure from deforming due to torsion.
When the die cast angle bracket is connected at a right - angle to the T - slot or connected to a plate, the lugs on one side of the connection surface need to be ground flat.
Die Cast Bracket Accessories
Product Parameters
Application
Die casting brackets are commonly used in L connection and T connection of profile frames.
It could be fastened to profiles faces with bolts, washers and nuts.
Professional Service
Quick and Easy Order in Four Steps:
Your various requirements could be realized by our complete industrial chain, including:
-standard kits ex factory
-pre-fitted modular
-profiles and fittings cut to size according to customers' assembly purpose
-drilling, punching, tapping accurately following your design requirements
-molding for profiles and accessories
-engineer supporting for individual application
Company Profile
){kind=link}